

Yeah there are a lot of reddit-esque comments here acting like they’re too smart to be fooled by that.
Yeah there are a lot of reddit-esque comments here acting like they’re too smart to be fooled by that.
You might look into Portainer. It gives you a nice GUI to manage docker-compose files, create stacks, edit and update, etc. On my Proxmox server, I have two LXCs set up that run almost all my services like immich, frigate, radarr/sonarr, VPN, qbittorrent, homarr, etc You’ll probably find docker compose much easier to understand than plain docker especially considering there are a million templates out there that you can mostly copy and paste.
I honestly think it’s more of a gimmick than anything because no two identical printers will run exactly the same and there’s no way for it to accurately account for filament issues like poor quality plastic or moisture content. I can’t see it being any more accurate than basic guidance or real general things to watch out for like printing overhangs without supports.
My Bambu X1C will do both of these and tell you when it’s time to lube the Z axis screws for example, but I think all printers will shut down if the thermistor (what measures the heat) is reading incorrectly due to it being bad or a problem with the extruder heater since not doing so could be catastrophic rather than just giving you a shitty quality print.
What do you classify as independent?
Why the special qualifier of “computerized” chess? Do humans regularly lose to Atari’s at chess? LLMs are computerized too.
Weigh that against the stress of not having a job or place to live though.
Try reducing the line width especially for the initial layer. I googled about Arachne line generator and it looks like it’s the default wall generator in PrusaSlicer as of v2.5. I can’t tell if you’re using a textured build plate or not but you could also try swapping to a smooth one (or vice versa) and seeing if that makes any difference. You don’t even need to print the whole tab for testing, just the first few layers to see if you’re on the right track.
You could also try using a 0.2mm nozzle just for the white filament and seeing if that helps.
This is a resolution issue, so think about X & Y settings rather than Z settings like layer height. You need to reduce the line width and/or use a smaller nozzle like 0.2mm. You might also have a bit too much squish on your first layer which you could measure by printing a line and measuring it with calipers and comparing the slicer value to the actual value to see if there’s any difference.
I’m not familiar with PrusaSlicer but Bambu Studio has a wall generating setting called “Arachne” which does a better job of generating the small features/walls you need for text even with a 0.4mm nozzle. You might see if there’s a comparable setting for Prusa.
I think they’re saying women can go to UPS to ogle buff men but I don’t think I’ve ever seen a buff male UPS worker/driver.
These both seem like solid middle class purchases.
I feel like this is missing a word or two
I’m almost 40, tall, not in great shape, have bad posture, and have two misaligned disks in my lower back and even my back pain isn’t that bad, so I would say that no it’s not normal. You should definitely get that checked out.
Well a car from 2006 isn’t going to stay pristine forever so it’s no surprise it’s gone down over the past 20 years.
Yeah I’m definitely jealous of the people who have a Microcenter nearby. We had Radio Shack and a Fry’s 45 minutes away and both are gone now. Fry’s came in clutch when my old AM3 backing plate snapped in half and my CPU cooler fell off. They had one in stock and I was able to buy just the backing plate by itself. If I’d gone to Best Buy, they’d probably just look at me weird and tell me I’d need to buy a whole new computer.
I think the Define 5 is a good option as well. I bought the 6 in 2018 because it was new, was white, and only like $99 at the time and it’s served me well. Every couple of years I’d buy some more drive trays as my pool filled up and I needed more space.
I just rebuilt my whole system a couple of months ago but kept the case because it works so well and there isn’t much on the market like it without getting into fullsize cases. It’s nearly silent even with 5 fans and 9 HDDs inside. It sits about 2 feet from me on my desk and I only hear a tiny hum from the fans.
PC Part Picker has filters that will let you set all your requirements and show you what’s available. Since you want ECC and low cost, you might be better off finding options on PCPartPicker and then looking for those items used on ebay.
If you don’t have a case already, you might check out Fractal Design. They have several cases for lots of 3.5" drives. I have a Define 6 and it holds like 12 3.5" and 4 2.5" in a midtower format and it’s constructed really well. You will need to buy additional drive trays though as they only come with 4 I think.
I’ve made a couple electronics orders recently where my order seemingly just slipped into a void somewhere (no confirmation email, no tracking info) and then just showed up at my door two weeks later. I think Amazon has made us all forget what ordering things from the internet used to be like.
It’s clearly “slurp nook,” that nook where you can go to slurp soup as loudly as you want without being judged.
Based on your username, I can declare you an expert on the subject matter.