I think if you didn’t assign a tag on the Release Profile it applies to all series.

Grab a deconstruction planner and add it to the filter of your merge splitter so you don’t get any output on the one side. (edit: whoops, I see the ones at the top are filtered, I was talking about the one on the left)

Fun fact! Timezones don’t just break at 1 hour increments. https://www.timeanddate.com/time/time-zones-interesting.html

I do a lot of Architecting for my company and it’s often easier to have direct access to DNS to make quick changes rather than wait one or more days for an engineer to go change records. If this is just going to be a test environment perhaps you could delegate a subdomain of your current domain. E.g. Add NS records for test.example.com that point to the NS of the contractors hosted zone. This gives you control to tear it down (delete the NS records) but allows the contractor the ability to build the environment out.

I have never done RAID over USB, but have done various JBOD setups using SCSI. I think the general idea is that USB having such an easily disconnected connector plus the latency overhead on translating SATA to USB to SATA again means you have a higher chance of corruption. SCSI setups typically have connectors with locking mechanisms to prevent easy disconnection.

If eSATA is an option it might be better for the performance and it has a latching mechanism to prevent easy disconnection. You can get a 2-port eSATA PCI card for about 50 bucks.

Oh, and if you have a free PCI port, you could add internal SATA ports to mount the drives internally.

Sometimes distros will alias rm with the -i flag so it prompts for each file. An annoyance but makes you stop and think before continuing.

I know tailscale prefers being installed on every machine but not all of my machines are even capable of running custom code. I use a single tailscale router that published my internal network to tailscale and if the internet is down everything still works fine internally.

With TrueNas you can do it two ways: ISCSI disks that are mounted to the VMs or via NFS. With ISCSI you won’t have access to the data from the TrueNas side as the data will be stored as a volume file. With NFS you get the best of both worlds as you’ll be able to access the files via other TrueNas services like SMB/SFTP. I have my Jellyfin/Plex running via NFS and have few issues, though I’ve not tested it with large 4k/8k videos yet. I mostly run 1080p.

No wildcard support sigh

Only if you define it.

const that = this

+1 for Backblaze. They have a convenient backup software too that works great. I backup my parents laptop using it, and use their S3 storage for my NAS backups.

A popular EHR cloud service that we use has a developer portal where operations such as logging in or entering two-factor codes would take upwards of 2 minutes to process.

When I asked our rep about it they went “eh it’s normal”.

This same company designed a XML SOAP API where if you request too much data, it just returns a HTTP 200 with no content. No error message or formatted SOAP reply, just completely nonsensical response.

I hate this company but there’s literally very few choices in this space.

This would depend on whether the limit is defined as ingress or egress or both. For example AWS has free ingress traffic from the internet but there is a cost for egress traffic to the internet.

A better solution would be to find a unmetered service, which means that you have a fixed transfer speed (e.g. 500 Mbit) but have unlimited bandwidth. OVH offers this in their VPS products.

Not OP but this is how I learned it and how it’s presented in the help file.

$ help while
while: while COMMANDS; do COMMANDS-2; done

$ help if
if: if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi

I bought it personally but I would hardly call it expensive. The three year license is like ~67 USD a year for both CRT and FX.

I love it mainly because it’s multi-platform but I wish it had more features. They boast their great integration with VShell but it would be much better if they just had better support for OpenSSH, like being able to push ssh keys to a host.