Built when Netflix first took away password sharing. Thanks for the heads up Netflix! Would not want to start this project now 😂
Edit: adding temp and specs
I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380
Drives are 10x 14 tb wdd in raidz1, 6 256gb sata ssds in a pair of 3 wide mirrors for special vdev metadata, a 512gb nvme for read cache, and a 64gb optane for slog
An…interesting approach to noise-proofing your system :D
Still rocking my fractal R3 nothing beats it for disk space and sound proofing
Raid z1 with 10 14tb disks? That’s a bold move cotton, let’s see how it plays out.
Yea, I definitely would have gone z2, but this all started with the drives, and slowly expanded into this monster. But so far it’s been running smooth. The drives were added at different times to so they shouldn’t fail at the same time (hopefully 😂)
Here’s mine : )
Oooo, cute mini system! I’ve always wanted to start a cluster with tiny towers like that
For anybody not doing generative AI with it and not running massive loads on it, if you’re going to use an old gaming PC as a home server, at least replace the graphics card with a cheap one with no fans or use the integrated graphics on your CPU (something I believe pretty much all consumer CPUs of the last two decades have) and underclock the CPU if you don’t need full processing power since even small reductions in clock speed can significantly reduce the maximum temperature.
or use the integrated graphics on your CPU (something I believe pretty much all consumer CPUs of the last two decades have)
many ryzen CPUs don’t have integrated graphics. I think it might have become baseline from just ryzen 6000? but plenty of very still good chips were released before that. I wouldn’t trade them for an intel.
and underclock the CPU if you don’t need full processing power
underclock and undervolt
I posted specs and temps if you were curious 😊
underclock and undervolt
If I’m not mistake only hobbyist level motherboards let you control the voltages and if one knows enough to get one of those they probably don’t need the advice I gave.
Also it’s hard to end up with a non-working or unstable configuration with underclocking, whilst it’s pretty easy to do so with undervoltage.
That said, for those who know what they’re doing, your suggestion definitely delivers lowers temperatures than underclocking alone though at the risk of a less stable system (which can be ameliorated with proper stress testing).
Looks like with the doors closed its going to be smokin.
The one fan in the left will do the trick
Plus the other fan hiding behind the system 😉 posted temps in a comment of you eye curious
i love the toxic kiddies on selfhost these days “its too hot the fans wrong” op explains and gets downvoted. whats the saying?, “not my circus not my monkeys”. if this is the energy your going to bring to this community go back to reddit and be a toxic pos there.
I’m choosing to focus on the positive comments, and giving info to those who doubt. In the end I know there’s a few people at least who saw this and got some inspiration for a fun project
You are a bigger person than I <3 what youre doing is a great solution to noise in a living space and if you have no thermal throttling its designed exactly for what its intended for. Thanks for sharing you have given me some ideas for managing my own noise issues regarding homelabbing.
I just think no one’s really coming at it in a way they think it’s rude, and most had been out of concern, just worded rough. I definitely can be rough with my words sometime so I can’t be too mad. Also thanks for engaging ❤️ love you and all the lurkers following along
lolz that’s wayyyy too much emotional maturity for the internet. we need more of it :)
For those worried about temps. The cpu never goes past the 80s when being ran hard, and drive temps are comfortably in the 40s
A little bit of airflow can make a huge difference. If it works it works. I think the doubters have just never experimented.
You left in your IP no0b! Now I’m gonna pwn your server with my super hacker skillz xoxoxoxo
P.S. That’s is one hell of a setup! I am surprised how well ventilated it is
I just sent a ddos attack to his ip. In an unrelated event my doorbell camera has stopped working?
Means you got the wrong ip…the correct one is 127.0.0.1
127.0.0.1 sweet 127.0.0.1
Oh, and if anyone is curious on specs. This is my old gaming rig but it’s: I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380
Bet it’s quiet as fuck tho
Super quiet, and had been running non stop for over a year no with no problems 😊 also that i9 runs super hot. When it was in my lil gaming rig it was always running up near 90. So retiring to the server had been much more gentle on it, lol
Always in 90s? Did you remember the thermal paste on reinstall? Lol
It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream
Seems cozy
thanks for sharing, nicely done, would love a video or dB reading. noise wise, my rack doesn’t get too bad running mini-itx boards and quadro p2200s; my gaming rig, on the other hand, could benefit from this. SFF case with a deshrouded rx 6650 xt and 80mm server fans from arctic (max 8000rpm). it sounds like a jet engine spinning up when i play anything, despite the 3000rpm limit i put in fan control.
aside, would you mind sharing your av1 settings? i currently pass everything through ffmpeg to mkv in an attempt to save space with my plex library
Here’s my tdarr flow. I have redundent paths to handle if qsv fails and to retry in software if you’re curious of why it splits
Also, here’s my lil gaming rig too. Runs warm, but it’s tiny.
It’s a 9800x3d paired with a 6800xt
There are two fans built into the cabinet. Temps stay nice and cool
I love that you’ve got this explanation because my first reaction was… Hot! Too… Hot!
It was a common comment after a few hours 😂 also looking forward to spaceballs the sequel!!
Me too! I hope they reference “the search for more money!”
Or spaceballs 3, the search for spaceballs 2
Ever just throw a hot pocket in there for a couple minutes?
Lol, it’s warm. Though thanks to the intake and exhaust built into the cabinet the temps are great. I added what they currently are while it’s rencoding by library.
Not sure if stroke or just above my head.
I think “tennis” was supposed to be “temps” but got autocorrected.
This post here. I fixed it on most replies, but SwiftKey did not like me using the word temp
How are the temps?
Added them in another comment, but I’ll put them here to. This is while I have plex and frigate running with tdarr rencoding 8 files into av1 at a time
*hella
Yes
Yeah, seems a second fan would help with air flow into/out of the case. Depending on how air tight everything is when it’s closed.
There are actuality two fans. There’s an intake on the bottom full cold air, and the top is exhaust. I posted temps if you wanna see how it is at full tilt
Makes sense, looks like a good build then.
Thanks! Has been alot of fun playing with
If it’s just a media server that spends 99.5% of its life idling, temps might not actually be that bad.
But enclosed in a box without much airflow and those temps are going to creep up over time. And take even longer to cool down. Hopefully there’s fans in the bottom or side. Because one exhaust is not great for even just the heat from those hard drives.
I think the best way to handle airflow out is to have a turn or two on the intake/exhausts for the noise to get trapped. I personally just put mine in my basement though. That limits the sound pretty well.
I personally built a server house a couple hundred feet away from my mansion.
I’d also put mine in the basement, but I live in a flat.
All of those hard drives will produce quite a bit of heat just sitting idle.
They won’t really produce any heat if they sleep properly. Also that should help them last quite a bit longer.
They usually do transcoding when you watch a movie or so. Depending on hardware that may heat it up a bit. I guess if it would have heating problems then OP would have resolved that already though.
Excellent heat retention! Doubles as a stove top
There’s actually two fans built into the cabinet! Pulls more fresh air then if it were outside of it. 😎❄️
bro built an expensive radiator that hosts movies
Thankfully all either used, or bought before the Ai drive prices
